Steps to troubleshoot the Panasonic Inkjet printer error 30, 33, 34 or 35: Press the "INK" button which can be found in the "Control Panel" easily. Step2: Using the dial pad Panasonic Printer Support Phone Number
According to the expert team of the Panasonic Printer Technical Support Guidance, by using the dial pad, you need to write to the "press 2 (Replace Ink)" which will prompt you to display the "PLS OPEN COVER" message. Step3: Scanner Cover release Pull up the "Scanner Cover release" option which is located under the control panel and lift the scanner cover up carefully. This carriage will be further moved to replace the ink. If the carriage seems to move to the left side then the machine needs to go for a service. Step4: Working with the "silver springs" After the carriage, you need to get rid of all the ink cartridges from the printer carefully. You will get to see two springs that are located on the front of the car. They are known to thin silver springs approximately 2 1/2 inches and then set towards an angle. If the spring is completely out of place then simply spring back to its original place. It can be used in the correct position. Step5: Reinstalling the ink cartridge If the spring is in proper place, then reinstall each of the ink cartridge carefully. Step6: Working with the Panasonic printer covers After installation of the ink cartridge is completed, you need to close the covers and check their security with the purpose of locking. The Panasonic printer will then be ready for you. The LCD screen of the Panasonic printer will prompt users to verify whether or not the ink cartridge has been removed. Resolve your issues to Panasonic Inkjet Printer by email at call @ + 1-888-597-3962 and get issues immediately and immediately. The technicians will assist you in the right direction and control of your business. Among many you came across Panasonic HL-6180DW control panel key not responding problem. Panasonic HL-6180DW is machine manufactured for all and wide range from small workgroups to medium organizations with printing features of all-in-one device. The machine was made for performing heavy duty printing as well. The device uses TN780 super high yield toner cartridges that print 12000 pages. With the same capacity, frequency and high –volume printing makes it more prone to mechanical and network issues arrival common. Get Panasonic Printer Technical Support for the mentioned issue and get resolved under the trained technicians: Panasonic HL-6180DW Control Panel Key not responding fixed via following the below mentioned steps: Step 1: Restart the device Unplug the Panasonic HL-6180DW printer as disconnecting the device for some time say for approximately 30 seconds. Switch power back on. Step 2: Check for LCD display Look for the display showing date, time along with other options. If yes proceed to next step Step 3: In case LCD display is blank check for the power supply wire if it is properly connected or not. You might require plugging in directly on a wall socket using surge protector. Step 4: Test for key response Carry test for the Control panel key by pressing the dial pad and see if it responds accordingly on the LCD display Step 5: If you receive no response from the control panel key on the LCD display, massage each key in circular motion which will force any possible stuck keys. Step 6: Run the test again by pressing any key on the dial pad. Panasonic Printer Customer Support Number USA @ + 1-888-597-3962 (toll-free) for the proper guidance from the trained technicians. There may be chances after you have tried your best to solve the problem. It is always better to get basic troubleshooting done under the proper guidance of the experts. Get the problem resolved and enjoy your printing.